FW Murphy Centurion C5, Быстрый старт

Страница: 7 / 16

Section 50 00-02-1033
2018-12-03 - 7 -
Communications and Security Access
The display module is a highly integrated operator interface specially programmed to complement and
support the Centurion controller. The primary purpose of the display is to:

View controller operational information

View/edit controller operational parameters

Send commands to controller, such as stop, edit and reset
Display Passwords – All M-VIEW Models
Once you have entered using the default password, we recommend you change passwords for better
security. Refer to your M-VIEW Operators Manual if further details are needed.
There are two separate levels of passwords to accommodate security needs.

Operator / Standard password - includes access and some editing except the Super User Menu.

Super User password - includes access and editing to the Super User Menu in addition to the
Standard password features.

Default passwords are: Operator-164; Super User-133.

Your password access times out three minutes after the editing session is exited.
NOTE: If a pop-up message or password screen for login is displayed asking for
security access, you may log in from there.
Log In
– MV-5-C Display
1. From the Home / Gage screen, press the Setup / Enter key to access the Password screen. The
edit cursor rests on the far right digit. Example 00000.
2. Press the Up / Down arrows to add a number value.
3. Press the Left / Right arrow to move the edit cursor to the next digit and so on.
4. Press Setup / Enter to save, once all numbers are placed. Example 00164.
Log In
– MV-7T and MV-10T Displays
1. Touch the Setup / Enter icon to access the Setup Menu. Touch the Log On icon.
2. Touch the green arrow to enter the User Name screens.
3. Use the keyboard to enter a user name (op or super). Touch the green arrow to enter the
password screen.
4. Use the keyboard to enter a password Touch the green arrow to enter.