4
UNPACKING INSTRUCTION
CAUTION!
Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
REMOTE
1 ON/OFF
Press this button to turn on or turn off the Iight
3 Auto Mode
Press this button to run auto mode
4 Hopping Mode
Press +
/
- to adjust hopping speed
5 Fade 1, Fade 2
Press +
/
- to adjust fade speed
6 Strobe Mode
Press +
/
- to adjust strobe rate
7 Sound-Active Mode
Press this button to run
sound
-
active mode
8 Red Color
Press this button for Red color
9 Green Color
Press this button for Green color
10 Blue Color
Press this button for Blue color
11 White Color
Press this button for White color
12 Rose Color
Press this button for Rose color
13 AmberColor
Press this button for Amber color
14 Cyan Color
Press this button for Cyan color
15 Speed-
Decrease the speed of a program
16 Speed+
lncrease the speed of a program
CAUTION!
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the foil from the
battery support on the rear side of the remote control. Otherwise operation of the remote control is not possible.
