FUXTEC FX-KS142, Оригинальное руководство пользователя

Страница: 6 / 35

Original User Manual FUXTEC chainsaw FX-KS142_KS146_rev08
6
4. Explanation of other symbols on the device
Symbols for safety functions and maintenance are stamped on the device.
Proceed carefully according to these indications and
don't make any mistakes.
Inlet opening for refilling "MIX GASOLINE"
40:1
Position : Above the fuel cap
Inlet opening for topping up the chain oil
Position : Above the oil cap
Notes on the switch: Turning the switch to
"O" (STOP) switches off the motor.
Position : Right on handle next to the
ON/OFF switch
When the choke button (see page 5, item 4)
is pulled, the throttle closes. The start mode
can be set as follows:
Position 1 pulled out when the engine choke
is cold
Position 0 with warm engine choke pressed
in
Position: on the right side below the air
filter
The directions indicate that the chain brake
is released (white arrow) and activated
(black arrow).
Position : Front side on the chain cover
If you adjust the screw with a turn the
screwdriver in the direction of the arrow to
the "MAX" position, the oil flow is stronger
and if you set the "MIN" position, the oil flow
is lower.
Position: Device bottom
Mount the chain link in the direction of the
arrow
Adjust the chain tension. The tension
increases in the "+" direction and decreases
in the "-" direction. Approximate value: After
adjustment, the chain should still be liftable
by about a finger's width from the blade.