FUXTEC FX-KS142, Оригинальное руководство пользователя

Страница: 22 / 35

Original User Manual FUXTEC chainsaw FX-KS142_KS146_rev08
22
ATTENTION
Before starting work, first read the section
"Safety instructions". For practice purposes, it
is recommended that you first saw through
pieces of wood that are easy to cut.
This also helps you to become familiar with
the operation of the chainsaw.
Always observe these safety regulations. The
chainsaw may only be used for cutting wood.
It is prohibited to cut other materials with it.
Vibration and kickback differ for different
materials, and the safety characteristics would
not be guaranteed.
Do not use the chainsaw as a lever to lift,
move or split objects. Do not bend over fixed
stands when sawing. It is prohibited to
connect to the chainsaw's top shaft any parts
other than those specified by the
manufacturer.
It is not necessary to push the chainsaw into
the interface. Run the motor at full throttle
and apply only light pressure to the saw when
starting.
If the saw-chain is jammed in the cut, stop
the saw immediately. Do not try to pull out
the guide bar by force, but use a wedge or rod
to pry up the cutting edge.