FUXTEC FX-KS142, Оригинальное руководство пользователя

Страница: 11 / 35

Original User Manual FUXTEC chainsaw FX-KS142_KS146_rev08
11
PRECAUTIONS FOR CHAINSAW USERS WITH REGARD TO KICKBACK
CAUTION Kickback of the chainsaw can be caused by contact of the guide
bar tip with a solid object, or if the wood to be cut is compressed and the
guide bar becomes jammed during cutting.
Contact of the tip of the guide rail with a solid object can in some cases
cause a lightning fast kickback, throwing the guide rail backwards and
upwards towards the operator. Pinching the saw-chain at the upper part of
the guide bar may cause it to bounce back and towards the operator with a
quick movement. If either of these events occurs, you could lose control of
the chainsaw, which could result in serious injury.
Do not rely solely on the built-in safety features of your chainsaw. As a user
of this equipment, you must take some precautions to ensure that all work
with the saw can be performed without accident or injury
If you become reasonably familiar with the causes and characteristics of
kickback, you will reduce or eliminate the element of surprise, which
eliminates a common cause of accidents.
When the engine is running, always hold the
chainsaw firmly with both hands, the right hand on
the rear handle and the left hand on the front
handle. Grasp the handles firmly with the whole
hand. A firm grip reduces the effect of the kickback
and helps you to keep the device under control.
Make sure that the working area is free of
obstacles. Make sure that when cutting, the tip of
the guide rail does not come into contact with other
logs, branches or obstacles, which could cause an
accident.
Always carry out the cutting process at a high
motor speed.
When cutting, ensure good balance and do not
extend your arms too far forward, and do not cut
above shoulder height.