FUXTEC FX-AF1139, Оригинальное руководство пользователя, Страница: 20 / 22

Original User Manual FX-AF1139_rev03
20
10. TRANSPORT
Never lift or transport the milling device while the engine is running. When transporting the device between different
working areas, always switch off the engine.
Wait 5 minutes after switching off the device to cool down before transporting. The exhaust pipe of the device
remains hot after switching off the engine.
To transport the device, lower the transport wheel and place the device on it. Lift the handlebars with both hands so
that the cutters do not touch the ground and press the device to move on the transport wheel.
If you need to lift the device, check the device's weight in the technical data before lifting it to make sure it is a
weight you can handle.
If you transport the milling device in vehicles, secure it not to slip or tip over.
11. STORAGE
If the device is switched off, wait 5 minutes to cool down before storing the device.
The exhaust pipe of the device remains hot after switching off the engine. Never store the device in places near
combustible materials (straw or wood or ...), gas, or fuel.
Store the device in a place inaccessible to children or in an area that does not pose a possible danger to people,
dry, clean, and at a temperature between 0º C and 45º C.
Before storing the device, follow the instructions in the Maintenance chapter.
If you plan to store the device in a secure place, first drain the fuel. Fumes could come in contact with a flame or
hot body and ignite. If the fuel tank needs to be emptied, do so outdoors, and following recycling regulations.
To reduce the risk of fire, keep the engine, muffler, and fuel tank clean by removing the remains of cutting material,
oil, and grease.
12. RECYCLING OR DISPOSAL
Protect the environment. Recycle the waste oil from this device and take it to a recycling centre. Do not pour waste
oil into sewers, soil, rivers, lakes, or seas.
Dispose of your device sustainably.
You must not dispose of devices with regular household waste. Plastic
and metal components can be classified and recycled according to their nature.
The materials used for packaging this device are recyclable.
Please do not throw the packaging in the
household waste. Dispose of it at an official collection point.