FUXTEC FX-AF1139, Оригинальное руководство пользователя

Страница: 17 / 22

Original Bedienungsanleitung FX-AF1139_rev03
17
8.2.1. AIR FILTER
The dirt in the air filter will reduce the performance of
the device. Check and clean this element.
Note: The engine should never be operated without
the installed air filter.
8.2.2.
CHANGING THE engine OIL
Carry out the oil change only when the engine is still
hot.
ATTENTION!
Do not pour used oil into a
pipe system or onto the ground. The
contamination of groundwater and
groundwater level is subject to high fines.
There are unique collection points at filling stations. If
not, your local authority will provide you with relevant
information.
Note: There are two methods available for draining the
engine oil. You can drain the oil by unscrewing the drain
plug (Y2) at the bottom of the filling nozzle or by using a
FUXTEC suction pump (not included) and sucking the
oil through the filling nozzle (Y1) of the device. We
recommend collecting the oil for easy implementation,
cleaning, and safety.
To change the oil:
-
Place the device on a horizontal, level, and
transparent surface.
Drain the engine oil:
-
When sucking out the used oil: Remove the engine
oil plugs (Y1) and suck out the engine oil by
inserting the engine oil cleaner downwards.
-
If you choose to drain the oil by draining (Y2)
through the drain plug, please note the flow path that
the oil takes into a large container to collect all the
oil before it reaches the floor.
-
We recommend that you place a large plastic cover
on the area where you change the oil so that no oil
gets to the floor. Once the work area is prepared,
remove the filler cap (Y1), remove the oil drain plug
(Y2), and tilt the device slightly so that the oil comes
out and drains into the container.
-
After all, oil has been drained, turn the drain plug
back into the device.
8.2.3.
CHECKING THE SPARK PLUG
When starting up a device, the most common problems
are caused by a dirty or poorly functioning spark plug.
Clean and check the spark plug regularly.
Check whether the electrode gap is correct (0.6 - 0.7
mm).
8.2.4. CLEANING THE CYLINDER FINS
The cylinder fins are responsible for cooling the engine due
to air contact.
These fins must be clean and without any
material, including those that restrict the airflow.
Filling nozzle (Y1)
Drain plug (Y2)