32
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
1234567890123456789012345678901212345678901234567890123456789012
Channel 6: Dimmer/Shutter/Strobe
0
Shutter closed
220-223
Start internal program 6
1-129
Dimmer
224-227
Start internal program 7
130-140 Full circle
228-231
Start internal program 8
141-150 Shutter closed
232-235
Start internal program 9
151-199 Strobeffect (1-6 flashes per sec.) 236-239
Start internal program 10
200-203 Start internal program 1
240-243
Start testing program
204-207 Start internal program 2
244-247
Reset (after 4 Sec.) and enable DMX-control
208-211 Start internal program 3
248-249
Disable DMX-control
212-215 Start internal program 4
250-251
Switch lamp off and disable DMX-control
216-219 Start internal program 5
252-255
Shutter open
Channel 7: Focus
Channel 8: Zoom
Channel 9: Fade-in time
Channel 10: Smooth PAN-movements (16 Bit)
Channel 11: Smooth TILT-movements (16 Bit)
5.4 Switching the device off
Switch the device off via control channel 6 Switch lamp off.
If the device is to be taken out of operation for a longer period of time, the power switch is to be set to OFF and the
device is to be disconnected. The internal battery backup will store the settings for up to two years.
6. Maintenance and cleaning
DANGER TO LIFE !
Disconnect from mains before starting maintenance operation !
It is absolutely essential that the projector is kept clean and that dust, dirt and smoke fluid residues must not build
up on or within the projector. If this happens, the light output from the projector will be significantly reduced.
Regular cleaning will not only ensure the maximum light output, but will also allow the projector to function reliably
throughout its life. A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no
circumstances should alcohol or solvents be used!
The front mirror and objective lens will require monthly cleaning as smoke fluid tends to building up residues,
reducing the light output very quickly. The cooling fan should also be cleaned monthly.
The gobos may be cleaned with a soft brush.
The dichroic colour filters, the gobo-wheel and the internal lenses should be cleaned every three months.
The interior of the projector should be cleaned at least annually using a vacuum cleaner or air jet.
To ensure a proper function of the rotating gobos, we recommend lubrication in six month intervals. The quan-
tity of oil must not be excessive in order to avoid that oil run out when the gobo wheel rotates.
7. Technical Specifications
Power supply
- Power supply:
230V / 50Hz
- Power consumption:
400W
- Fuse:
T3.15A
Lamp
MSD 200 W GY-9,5 Lamp
- Lamp life:
approx. 2,000 hours
- Article designation:
MSD/HSD-Lamp 200 W socket GY 9.5 2000h
- Article no.:
91010250
Gobos/Dias
- Slide-wheel with 4 rotating gobos/dias
- Up to 4 slides can be inserted in the slide-wheel
- Gobo-wheel with 5 static gobos
All manuals and user guides at all-guides.com
