25
weekday, press the Up/Down-buttons until the display shows the desired weekday and Of.
Press the Enter-button.
Adjust the hour via the Up/Down-buttons.
Press the Enter-button.
Adjust the minutes via the Up/Down-buttons.
Press the Enter-button.
REMARK:
The adjusted operating periods can be called up via the Enter-button.
Delete the programmed operation periods:
Press the Enter-button.
The display shows Mo.On. Now you can delete the starting time for Monday. If you wish to select a different
weekday, press the Up/Down-buttons until the display shows the desired weekday and On.
Press the Enter-button.
Adjust the hour via the Up/Down-buttons to ** (between 23 and 0).
Press the Enter-button.
Checking the operating-hour-meter
Your Promotion Scan offers the possibility to check the operating hours of the projector..
Press the Mode-button.
Press the Up-button until the display shows POTI.
Press the Enter-button. The display shows the operating hours in hours.
Press the Enter-button.
REMARK:
The operating-hour-meter cannot be resetted.
Checking the operating-hours of the lamp
Your Promotion Scan offers the possibility to check the operating hours of the lamp.
Press the Mode-button.
Press the Up-button until the display shows LATI.
Press the Enter-button. The display shows the operating hours of the lamp in hours.
Press the Enter-button.
Resetting the operating - hours of the lamp
After exchanging the lamp, you should reset the operating hours of the lamp.
Press the Mode-button.
Press the Up-button until the display shows LATI.
Press the Enter-button. The display shows the operating hours of the lamp in hours.
Hold the Function-button, press and hold the Down-button and press and hold the Enter-button. Hold these
buttons for approx. 2 seconds until the operating-hours reset to 0 and the display shows 000.
Adjusting the reset - intervals
This adjustment is needed if the operating hours of the device have been programmed and the projector is to be run
automatically for a longer period of time.
The stepper motors used in this scanner work with supreme precision and are extremely reliable. Nevertheless,
fast mirror-movements and repeated strobe-effects can adjust the motors slightly. In such cases, the motors have
to be trimmed in a reset. In order to avoid misplaced misplaced projections in the long run, you can adjust the
reset-intervals with this function.
Press the Mode-button.
Press the Up-button until the display shows RETI .
Press the Enter-button. The display shows the current setting (0.0h - 23.9h)
REMARK:
Please avoid the setting 0.0h, as the device will continuously reset.
Adjust the desired interval via the Up/Down-buttons.
Press the Enter-button.
REMARK:
We recommend that you always adjust 1 Reset - even if you have only programmed relatively
smooth program-runs.
The projector will then cancel the current program, reset and restart the program in the programmed intervals.
Resolution of the PAN/TILT- movements
This function is only needed for external control via a DMX-controller. In the internal mode, the setting is always 16
bit.
In this mode, you can define whether you want to run the scanner in 8-bit-mode (8 control channels) or in 16-bit-
mode (11 control channels. The 16-bit-mode requires 11 DMX-channels and enables a higher resolution of the
mirror-movements.
All manuals and user guides at all-guides.com
