DMX-controlled operation
Building a serial DMX-chain:
Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the next fixture. Always
connect one output with the input of the next fixture until all fixtures are connected.
Caution:
At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120
Ω
resistor
between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture.
Addressing
The Control Board allows you to assign the DMX starting address, which is defined as the first channel from
which the EYE-18/EYE-36 will respond to the controller.
Please, be sure that you don’t have any overlapping channels in order to control each EYE-18/EYE-36
correctly and independently from any other fixture on the DMX-chain.
If several EYE-18/EYE-36 are addressed similarly, they will work synchronically.
Press the Up/Down-buttons for setting the desired starting address. Now you can start operating the EYE-
18/EYE-36 via your lighting controller.
DMX-protocol
Channel 1
PAN-movement
Channel 7
Blue
Channel 2
TILT- movement
Channel 8
Strobe
Channel 3
PAN/TILT-speed
Channel 9
Reset, internal programs
Channel 4
Rainbow effect
Channel 10
PAN fine
Channel 5
Red
Channel 11
TILT fine
Channel 6
Green
Channel 12
Dimmer
Technical specifications
EYE-18
EYE-36
Power supply:
230 V AC, 50 Hz
230 V AC, 50 Hz
Power consumption:
80 W
135 W
DMX-control-channels:
12
12
DMX-512-connection:
3-pin XLR
3-pin XLR
Flash-rate:
18 Hz
18 Hz
Length of base:
290 mm
290 mm
Width of yoke:
290 mm
290 mm
Height (head horizontal):
350 mm
360 mm
Weight:
8,5 kg
9,0 kg
Maximum ambient temperature t
a
:
45° C
45° C
Maximum housing temperature t
B
(steady state):
60° C
60° C
Min.distance from flammable surfaces:
0.3 m
0.3 m
Min.distance to lighted object:
0.3 m
0.3 m
Fuse:
F 2 A, 250 V
F 2 A, 250 V
Recommended controllers:
FUTURELIGHT CP-240
No. 51834265
No. 51834265
FUTURELIGHT CP-256/32
No. 51834286
No. 51834286
FUTURELIGHT CP-528
No. 51834315
No. 51834315
Wizard-512 USB DMX-So Interface
No. 51860102
No. 51860102
Wizard-1024 USB DMX-So Interface
No. 51860110
No. 51860110
Please note: Every information is subject to change without prior notice.12.05.2005 ©
