FUTURELIGHT EYE-18/EYE-36
Quick Guide
Control Board
Main
menu
Sub menu
Extension
Display
Function
VALU
A001~A511 (AXX)
DMX address setting
ADDR
SLAV
ON/OFF (SLAV)
Slave setting
AUTO
ALON (AU-A)
Automatic Program Run
in Stand Alone
MAST (AU-M)
Automatic Program Run
as Master
SOUN
ALON (SO-A)
Sound-controlled Program
Run in Stand Alone
RUN
MAST (SO-M)
Sound-controlled Program
Run as Master
VALU
D-00 ~ D-30 (DXX)
D-00
Display the DMX 512 value
of each channel
RDIS
ON/OFF
Reverse display
0
MODE
DISP
CLDI
ON/OFF
Shut off LED display
RPAN
ON/OFF
Pan Reverse
RTIL
ON/OFF
Tilt Reverse
16BI
ON/OFF
Switch 16 bit/8 bit
REST
ON/OFF
Reset
LODA
ON/OFF
Restore factory settings
1
SET
VER
V-1.0~V-9.9
Software version
MATI
0000~9999 (hours)
Fixture running time
2
TIME
CLMT
ON/OFF
Service-function
STEP
S–01 ~ S–48
Steps of Program Run
C01 ~ C30
01XX (00~FF)
30XX (00~FF)
Edit the channels of each
scene
TIME (sec.)
T – – X (1~9)
Time for each scene
3
EDIT
SC01
~
SC48
CNIN
ON/OFF
Edit program via controller
Stand Alone operation
In the Stand Alone mode, the EYE-18/EYE-36 can be used without controller.
Disconnect the EYE-18/EYE-36 from the controller and call the internal program.
1. Press
[MODE/ENTER]
button to enter the main menu
"MODE"
(display flashing)
2. Press
[MODE/ENTER]
and select
“RUN”
by pressing
[UP]
button.
3. Press
[MODE/ENTER]
and select
“AUTO”
by pressing
[UP]
button.
4. Press
[MODE/ENTER]
and select
“ALONE”
by pressing
[UP]
button.
5. Press 3 x
[EXIT]
to confirm, the display shows
“AU-A”
.
Please refer to the instructions under Control Board, Main functions, menus Run and Edit.
