00078079.DOC, Version 1.0
33/55
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature
T
a
= 45° C must never be exceeded.
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.
DESCRIPTION OF THE DEVICE
Features
High performance LED Moving Head with 150 W LED
• Equipped with a 150 W COB LED in RGBW colors
• 18, 20 or 23 DMX channels selectable
• With integrated wireless receiver for WDMX operation
• Supports RDM (Remote Device Management)
• Effect wheel with rotating 3-facet prism
• Macro function for rotating gobos/rotating prism combinations
• Stepless RGBW color changing
• Gobo wheel 1 with 7 rotating gobos plus open
• All gobos can be interchanged
• Slot-in gobo system for exchanging gobos without tools
• With gobo shake function
• Gobo wheel 2 with 7 static gobos plus open
• Exact positioning via 16 bit PAN/TILT movement resolution, gobo indexing, focus, iris
• Dimmer
• Motorized focus
• Frost filter
• Steplessly adjustable iris
• Strobe effect with adjustable speed
• Random strobe effect
• Automatic position correction
• PAN angle switchable between 630°, 540° - 90° offset or 540°
• Switch-mode power supply, automatic power supply adaption between 100 and 240 Volts without power
selector
• Sound-controlled via built-in microphone
• ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts
etc.
• Control board with graphic LCD display and foil-keyboard for adjusting the DMX-starting address,
PAN/TILT reverse, reset
• DMX-controlled operation or stand-alone operation with Master/Slave function
• 56 preprogrammed scenes in Program Run for stand-alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 7 built-in programs can be called up via DMX controller
• Software upload by optional FUTURELIGHT ULB-1 upload box via DMX link
• DMX control via every standard DMX controller