51834265_V_1_2.DOC
22/41
Del-button and press the Bank Copy-button.
Delete all scenes
Caution:
When you select this function, all programmed scenes will be irrevocably lost!
Press and hold the Program-button and the Bank Down-button while disconnecting the device from the
mains. Connect the device to the mains again.
6.5 Sound-control
You can activate the sound-control by pressing the Music-button (LED flashes). Please note that programs
and records are only active in this mode when the controller receives a music-signal. If there is no music
present, the program or chaser stops.
7. PROBLEM CHART
PROBLEM
CAUSE
REMEDY
No power.
The power unit is not connected.
Check the connection cable of the
power unit and any extension-cables.
No signal output.
Blackout-mode activated.
Switch off blackout by pressing the
Blackout-button.
8. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
9. TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
via 9-12 V DC, 300 mA power unit included in the delivery
Power consumption:
5 W
Number of control-channels:
240
Integrated programs:
30 with 8 scenes each
Chasers:
6 x 240 scenes
Sound-control:
via built-in microphone or via audio-input
Audio-input:
RCA
Audio-sensitivity:
0.1 - 1 V
DMX 512-output:
3-pin XLR-connector with polarity selector
Dimensions (LxWxH):
483 x 134 x 90 mm
19" mounting dimensions with 3 u
Minimum mounting depth:
170 mm
Weight:
2.5 kg
Please note: Every information is subject to change without prior notice. 20.04.2006 ©
