（
5
）
When the power of the remote controller is consumed up
or the remote control function fails, please turn off the power of the
remote controller. The boat will automatically enable the returning
function and return to the origin after 7s. Four lights will
continuously flicker in automatic return.
（
6
）
When the boat power reduces to about 30%, the red
power indicator of the boat will be on and you can continue using
the boat for about 15 minutes. When the power reduces to about
20%, the remote controller will give out the power alarm and the
red power indicator of the boat will begin to flicker. At this time, the
boat may enable automatic returning function in case of lower
power. You should stop using the boat immediately and charge it.
（
7
）
The remote controller should be powered by high-quality
AA-sized batteries. When the power of the remote controller
reduces to 30%, the power alarm will be given out. When the power
reduces to be under 20%, please change the batteries of the
remote controller in time. In addition, always make sure that the
remote controller has enough spare batteries for use at any time.
Otherwise, when the power of the remote controller is consumed
up, the boat cannot be controlled and an emergency will occur.
（
8
）
Before the GPS automatic driving function is enabled,
please make sure the right rocker is located in the middle position.
Manual operation is always dominant in automatic driving. When
you operate the right rocker or press “Exit” key during this period,
the automatic driving program will terminate and the boat will
switch to the manual operation mode.
