（
1
）
About 5-10 min after startup, the satellite signals will be
stable. When 10 satellites are available, the automatic driving
function can be enabled. When more than 15 satellites are available
and the boat is located in an open area without any obstacle, the
positioning precision can reach about 1m.
（
2
）
Every time the boat arrives at the fishing lake, please first
set the origin to ensure that the boat can automatically return to
the origin in case of an emergency. It is recommended to set the
origin at the water surface several meters away from the bank. The
automatic driving function should be enabled at the origin. The
bow should point to the extensive water surface as much as
possible to prevent the boat from stranding on the bank during
automatic steering.
（
3
）
Before the automatic driving function is used, the double-
motor speed adjustment knob should be manually adjusted to
make the boat advance without deviation on the still water surface.
The double knobs for motor speed adjustment should be adjusted
to the maximum clockwise. When the boat deviates to the left in
sailing, the right knob should be slowly adjusted anticlockwise,
vice versa.
（
4
）
When the boat cannot receive the signals from the
remote controller or the boat power reduces to the minimum
warning value, the boat will automatically enable the returning
function and return to the origin. The right rocker should be
located on the middle position in automatic return. Otherwise, it
will interfere with normal return. Four lights will continuously
flicker in automatic return.
