Push buttons
In
st
al
la
ti
o
n
:
S
ta
ge
5
Page 9 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PD3.5 - Projector Drop Mechanism
Important -
When
adjusting the drop of
the mechanism make
sure the sliders in the
top of the main box
do not reach the
stops at the end of
the slider channel.
The yellow button adjusts the drop, to
change the stop position push the yellow
button IN to cancel the preset position
and using the remote IN, OUT and STOP
buttons, stop the PD at the desired height.
Push the yellow button again so it’s in the
OUT position, the PD drop is now set.
Adjustments Details
Altering Drop Distance
Cable management
holes on both sides
of the unit
PD’s are sent out pre-set
to the max drop
Turn the screws on both sides of
the projector carriage to adjust
the level of the drop
Slider
