FUTABA T32MZ, Инструкция по эксплуатации

Страница: 177 / 189

177
＜
Data
＞
Fine tuning VR setting
Mixing rate 0% at center of VR
When the VR is turned counterclockwise
and clockwise, the mixing rate
increases and decreases, respectively.
Mixing rate 0% at left end of VR
When the VR is turned, the mixing rate
increases.
Mixing rate 0% at right end of VR.
When the VR is turned, the mixing rate
increases.
When the VR is turned to the left or right
of the neutral position, the mixing rate
increases.
ŏ95VHOHFWLRQ ŏ5DWHDGMXVWPHQW
ŏ2SHUDWLRQPRGHVHOHFWLRQ
*Displayed at VR setting.
ŏ$GMXVWPHQW
direction setting
>2SHUDWLRQPRGHV@
&2002123(5$7,21686(',1)81&7,216(7836&5((1
This section describes the functions often used at the function setup screen. Refer to it when setting each function.
Group/single mode switching (Gr./Sngl)
:KHQVHWWLQJPXOWLSOHÀLJKWFRQGLWLRQVOLQNLQJWKH
setting contents with other conditions (Gr.) or setting
independently (Sngl) can be selected. When the
EXWWRQLVWRXFKHGLWWRJJOHVEHWZHHQ*UDQG6QJO
*Group mode (Gr.) (initial
setting): The same setting
FRQWHQWVDUHVHWWRDOOWKHÁLJKW
conditions in the group mode.
*Single mode (Sngl): Select
this mode when the setting
contents are not linked with
other conditions.
*Selecting the single (Sngl) mode at each
condition after presetting in the group mode
(Gr.) is convenient.
Condition delay setting
Unnecessary fuselage motion generated when there
are sudden changes in the servo position and variations
in the operating time between channels at condition
switching can be suppressed.
When the delay function is set at the switching
GHVWLQDWLRQFRQGLWLRQDGHOD\FRUUHVSRQGLQJWRWKDW
amount is applied and the related functions change
smoothly.
>6HWWLQJPHWKRG@
1. Switch to the condition you want to set.
2. Touch the Delay button.
8VHWKHDGMXVWPHQWEXWWRQVWRVHWWKHGHOD\
*Initial value: 0
$GMXVWPHQWUDQJHaPD[LPXPGHOD\
Operations related to VR tuning 2SHUDWLRQVUHODWHGWRÀLJKWFRQGLWLRQV