FUTABA T32MZ, Инструкция по эксплуатации

Страница: 106 / 189

106
＜
Linkage Menu
＞
+(/,
&237(5
$,53/$1(
*/,'(5
9DULR0HORG\6HWWLQJ
Tap the [Melody] button
Current variometer
This is the changing point of climb and sink. When the variometer
is greater than this value, Vario Melody is climb type. When the
variometer is less than this value, Vario Melody is sink type.
Setting range：Range ↑ setting value 〜 Range ↓ setting value
Initial value：0.0 m/s
When the variometer is less than
this value, Vario melody is not
output.
Setting range：0 m/s 〜 +50 m/s
Initial value：0.0 m/s When the variometer is greater
than this value, Vario melody is not
output.
Setting range：-50 m/s 〜 0 m/s
Initial value：0.0 m/s
When the variometer is less than
this value, Vario melody is not
variable.
Setting range：
-50 m/s 〜 Offset value
Initial value：-5.0 m/s When the variometer is greater
than this value, Vario melody is not
variable.
Setting range：
Offset value 〜 +50 m/s
Initial value：5.0 m/s
*These settings can be
set each sensors.
žŷƋƈŃƕƈƏƄƗƌƒƑŃƒƉŃŹƄƕƌƒŃŰƈƏƒƇƜŃƖƈƗƗƌƑƊƖƀ
Dead band
（Not sound）
Fixed melody
Fixed melody
Variable melody
Variable melody
Climd side
Discontinuous
sounds
Sink side
Continuous
sounds
Range ↑
Deadband ↑
Deadband ↓
Range ↓
Offset
Offset
Deadband Range
The output vario melody does not change during the
delay time. In other words, this is a minimum time of
Vario melody output.
Setting range：0.0 s，0.5 s，1.0 s，1.5 s
Initial value：0.0 s
*This parameter is effective to all variometers.
Delay
Actually Variometer
0.0 m/s 1.0 m/s 3.0 m/s 4.0 m/s -1.0 m/s 2.0 m/s
Output Vario Melody
Delay time
1.0 s
0.0 m/s 1.0 m/s 3.0 m/s 4.0 m/s -1.0 m/s 2.0 m/s
žŹƄƕƌƒŃŰƈƏƒƇƜŃŧƈƏƄƜƀ