4. The BA-606 monolithic 1C is a 9-pin single-end-line 1C incorporating 2 high output current (500mA) PNP tran-
sistors, 2 NPN transistors, 4 diodes, and 4 resistors for a total of 12 components on a single chip.
5. High output torque: FP-S7; 3 kg-cm, FP-S12; 2.8kg-cm, FP-S16 (S16L); 2kg-cm, FP-S17; 2.6kg-cm, and FP-S8,
FP-S16G (retractable landing gear servo); 8kg -cm, 2.6kg -cm.
6. Compact, lightweight: FP-S7; 48g, FP-S12; 52g, FP-S16 (S16L); 41 g, FP-S17; 44g, and FP-S8; 50g, FP-S16G; 41g.
7. The 20mm (dia.) motor of the FP-S7 servo provides power torque. Thus making it ideal for boat and automobile
use. Waterproof case also makes it perfect for use in both fresh water and salt water areas.
8. FP-S12 is a low cost servo and powerful torque of 2.8kg -cm or greater permits use not only in large buggies,
but also in Class 60 boats, etc.
9. The potentiometer drive section of the FP-S16 (S16L) is separately driven through a one-stage gear. The life of
the element is almost permanent.
10. FP-S17 is a lightweight, rugged, high output, and low cost servo.
11. The high gear ratio and powerful torque of the FP-S8 make it the perfect retractable landing gear servo.
12. FP-S16G is a highest class miniature landing gear servo.
COMPOSITION AND SPECIFICATIONS
• COMPOSITION:
Model
Number of channels
Transmitter
Receiver
Servo
Battery charger
Transmitter/receiver nickel-cadmium battery
PP-6FN
6CH
FP-T6FN
FP-R6F
FP-S16 x 3
FP-S16Lx1
Nickel-cadmium charger F B C — 2 ( F )
FP-5FN
5CH
FP-T5FN
FP-S16x3
FP-S16Lx1
FP-4FN
4CH
FP-T4FN
FP-R4F
FP-S16x3
FP-S16Lx1
FP-3PN
3CH
FP-T3FN
FP-R3F
(FP-S7 x 2
FP-S16 x 2 FP-S12x2
FP-S17 x 2)
