14
1
1
1
1
1
2
3
4
● Cut the film of each
hole.
Included to aluminum horn.
● Futaba
Aluminum horn 38GM
Servo horn screw
M3×15 Hex
M3×16 Hex
Ball link
Control horn
M3 Nut
M3 Nut
M3 Washer
M3 Washer
Spring washer
Aluminum horn
M2x8 screw
Elevator rod
Ball link
Spacer
2. Install the Elevator Servo and Horizontal stabilizer
＜ Fuselage ＞
● Connect the extension
c o r d t o t h e s e r v o
beforehand and pass it
through in the fuselage.
Elevator servo
● M3 × 15 Hex
● M3 washer
● Attach
mounting screws
to the left and right
horizontal stabilizers.
● Insert the left and right
Horizontal stabilizer
into
the
Horizontal stabilizer tube
.
● Insert the
Horizontal stabilizer tube
into fuselage.
● Drill a hole in the wood screw in the servo mount.
Fix the 2-servos (Both sides) with
wood screws
.
Straight into the
mounting hole.
Straight into
the Horizontal
stabilizer tube.
3.Elevator linkage
● Linkage as shown. Use your radio to center your servos.
