11
6
7
Rudder
4
1
1
● Hinge
● Hinge
3
2
4
5
●
Horn guide
＜ Rudder ＞
＜ Rudder ＞
Grease
● There are four holes in the
vertical tail and Rudder
where Hinge enters.
● Grease up to the moving part of
the hinge.
● Do not allow grease to adhere to
the insertion part.
● Attach the rudder to the
hinges
with
Epoxy glue
.
！
Epoxy adhesive should not
adhere to moving parts.
！
Do not allow grease to adhere
to the insertion part.
！
Attention to the axial
direction of the hinge.
！
Epoxy adhesive
should not adhere
to moving parts.
● After the adhesion has dried, pour a suitable amount
of
Epoxy glue
into the hinge hole of the wing and
insert
aileron
into the
wing
.
●
Move the rudder
after drying. Check that the
rudder is securely attached.
ŰƒƙƈŃƌƗŃƖƈƙƈƕƄƏŃƗƌƐƈƖő
Clearance is needed.
No Clearance
●
R u f f u p
t h e c e n t e r o f t h e
control horn with sandpaper to
help the glue stick to the horn.
● Cut the film of
Horn guide
attachment part and peel off.
(Both sides)
1. Installation of Rudder
