![Fust NOVAMATIC KS238.1-IB Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/fust-novamatic/ks238-1-ib/ks238-1-ib_instructions-for-installation-use-maintenance_2351315008.webp)
8
603
I
GB
Mod. A
Reversibilità apertura porte
Tutti i modelli sono, predisposti per l’inversione dell’apertura delle porte, per un più
coordinato allineamento con l’arredo cucina. Per effettuare l’inversione delle porte, pro-
cedere nel seguente modo: dopo aver coricato il frigorifero dalla parte dello schienale,
usando appositi spessori per evitare lo schiacciamento del condensatore e il danneg-
giamento del gruppo compressore procedere nel modo seguente:
MODELLO A
A.
Svitare le due viti che fissano la cerniera intermedia (4) e liberare la portina (5).
B.
Svitare il perno (6) e montarlo sulla cerniera sinistra.
C.
Togliere, in ambedue le porte, le bussole e relativi tappi dai rispettivi fori e rimon-
tare il tutto sul lato opposto (bussole a sinistra, tappi a destra).
D.
Svitare il perno 2 e montarlo sulla cerniera opposta.
E.
Quindi rimontare la porta superiore (5).
F.
Fissare la cerniera intermedia (4) unitamente alla piastrina in plastica sottostante
dalla parte opposta per bloccare la portina.
MODELLO B
A.
Smontare la cerniera (2) in modo di liberare la porta (3).
B.
Svitare le due viti che fissano la cerniera intermedia (4) e liberare la portina (5).
C.
Svitare il perno (6) e montarlo sulla cerniera sinistra.
D.
Togliere, in ambedue le porte, le bussole e relativi tappi dai rispettivi fori e rimon-
tare il tutto sul lato opposto (bussole a sinistra, tappi a destra).
E.
Quindi rimontare la porta superiore (5).
F.
Fissare la cerniera intermedia (4) unitamente alla piastrina in plastica sottostante
dalla parte opposta per bloccare la portina.
G.
Rimontare la porta invertendo la posizione della bussolina (7).
H.
Dopo aver opportunamente girato la cerniera (2) rimontare il perno (1), quindi
rimontare il piedino nella stessa sede cerniera, dal quale e stato opportunamente
rimosso. Bloccare quindi la cerniera inferiore con le 2 viti.
REVERSING THE DOOR SWING
All the models are equipped with | reversible doors so the door opening can be changed
to match your kitchen furnishings. To change the door swing, proceed as follow: set the
refrigerator on its back on i the floor. | Protect the condenser and compressor unit from
being damaged by inserting spacers between the appliance and the floor
MODEL A
A.
Remove the two screws which fasten the centre hinge (4) and remove the door (5).
B.
Unscrew the pin (6) and mount it on the left hinge.
C.
From both doors remove the bushings and relative caps and reinstall them on the
opposite side (bushings to the left, caps to the right).
D.
Unscrew pin 2 and fit it to the opposite hinge.
E.
Reinstall the top door (5).
F.
Fasten the center hinge (4) together with the plastic shim underneath on the |
opposite side to hold the freezer door in place.
POSIZIONAMENTO E MESSA IN OPERA MODELLO 1
POSITIONING AND INSTALLATION MODEL 1
3
7
2
4
6
5
Mod. B
3
7
1
4
6
5
MODEL B
A.
Remove the hinge (2) and the door (3).
B.
Remove the two screws which fasten the centre hinge (4) and remove the door (5).
C.
Unscrew the pin (6) and mount it on the left hinge.
D.
From both doors remove the bushings and relative caps and reinstall them on the
opposite side (bushings to the left, caps to the right). E Reinstall the top door (5). 6
F. Fasten the center hinge (4) together with the plastic shim underneath on the |
opposite side to hold the freezer door in place.
G.
Reinstall the door When doing so, reverse the position of the bushing (7)
H.
Turn the hinge (2), fit the pin (1) and the foot in the same hinge housing i from
which it was previously removed Fix the bottom hinge using the 2 screws.
2
Содержание KS238.1-IB
Страница 36: ...461306121 10 05 2005 STAMPA TLF 603 ...