4
2. Search for a new Bluetooth device on the phone.
3. Select “FUSION” on the Bluetooth device list.
4. Some devices may require you to enter a PIN.
If prompted, enter “0000” for the PIN.
Please see P12 for detailed Bluetooth operation.
RGB 32K+ SELECTION
The initial colour setting for this unit is Colour Scan. To
quickly enter the 32K+ RGB colour menu, press and hold
the ESC/END/RGB button
You can then rotate the Encoder Volume Control to select
from the following pre-set display colours:
WHITE: GREEN1: GREEN2: GREEN3: AMBER: PINK1:
PINK2: PURPLE1: PURPLE2: BLUE1: BLUE2: USER
COLOUR: ORANGE
Press the ESC/END/RGB button button to confirm
your selection.
See Page 10 for details on how to set the USER COLOUR
STORE DEMO MODE
When you connect the unit for the first time and press the
Mute/Power button the unit will operate in Demo Mode.
To exit Demo Mode , press the Mute/Power Button again.
See Page 10 to turn Demo Mode off.
DASHBOARD
INSTALLATION
The following illustration shows a typical installation.
If you have any questions or require information regarding
installation kits, consult your car audio retailer.
If you are not sure how to install this unit correctly, have it
installed by a qualified installer.
