background image

10

COLOUR SCAN (default setting); WHITE; GREEN 1; GREEN 

2; GREEN 3; AMBER; PINK 1; PINK 2; PURPLE 1; PURPLE 

2; BLUE 1; BLUE 2; USER; DEFAULT.
USER (USER SELECTED COLOUR): 
This allows you to select your choice of display colour from 

over 32,000 combinations (32K+). When you select USER in 

the colour menu, press the Encoder Volume Control to enter 

then rotate to select the intensity of Red, Green & Blue (from 

between 0 and 32) to make your own custom colour.
To switch between R (Red), G (Green) and B (Blue) setting 

modes, push the TUNE UP button 
Press ESC/END/RGB              button once you have completed  

your selection.     

RADIO  OPERATION

TUNE INTO A RADIO STATION
1.  Press  the  SOURCE  button            repeatedly  until  [RADIO]  is 
displayed on the LCD screen.
2.  Select  your  preferred  listening  Band  (FM  or  AM)  by  pressing 
BAND      . There are 3 FM Bands [FM1] [FM2] [FM3] and 2 AM 
Bands [AM1] [AM2]. These multiple Bands allow you to store up to 
18 FM stations & 12 AM stations in memory (see below). 
3.  To  search  for  a  radio  station,  press  either  the  TUNE  UP  or 
DOWN
                       buttons to search for the next station higher than 
the current station frequency or lower than the current frequency.
4. To Manually tune to a radio station, press and hold either the 
TUNE UP or DOWN                    button until the tuner frequency on 
the LCD display starts flashing. You can then release the TUNE 

UP or DOWN button, and press it again repeatedly until you select 
your  desired  frequency.  After  5  seconds,  the  display  will  stop 
flashing and the unit will be tuned in to that station.
HOW TO STORE YOUR FAVOURITE STATIONS
1. Select your preferred Band. Generally you would use FM1 or AM1 
to save your favourite stations (6 stations per band). If you need to 
store more stations, you can use FM2/3 or AM2 for AM stations.
2. Tune in to your preferred station as per the steps above
3.  Press  and  hold  one  of  the  Preset  Station  Buttons  (1-6)  for  2 
seconds to store the station. The preset number and [SAVED] will 
be dislayed on the LCD screen.
TUNE TO A SAVED or PRE-SET STATION
1. Select the relevant BAND
2. Press the Preset Station Number corresponding to your 
required Pre-Set station.

RDS OPERATION

The  RDS  (Radio  Data  System)  function  operates  only  in  areas 
with FM stations broadcasting RDS signals. If you tune to an RDS 
station, an RDS icon and information about the presenter, station 
or program is displayed.
This unit supports the following RDS features:
(PTY) SELECT PROGRAM TYPE
Before tuning to RDS stations, you can select program type and let 
the unit search only for programs of the selected category.
Press the MENU button to enter the System Menu, press
ENTER  again  to  confirm  and  select  PTY  type  &  search  for  that 
style station. Please see a list of PTY Types & descriptions on P20:

Содержание CA-CD800

































Отзывы: