Furuno NAVpilot-700, Руководство по установке

Страница: 1 / 100

AUTOPILOT
NAVpilot-700/711/720
Installation Manual
SYSTEM CONFIGURATION .........................ii
EQUIPMENT LISTS ......................................iii
1. HOW TO INSTALL THE UNITS ............ 1-1
1.1 Control Unit FAP-7001/FAP-7011...... 1-1
1.1.1 Surface mount.......................... 1-2
1.1.2 Desktop mount......................... 1-4
1.2 Processor Unit FAP-7002 .................. 1-5
1.3 Rudder Reference Unit FAP-6112 ..... 1-7
1.4 Remote Controllers (option) ............... 1-9
1.5 Distributor FAP-6800 (option) .......... 1-12
1.6 Control Unit FAP-7021 ..................... 1-13
1.7 Cable Extension Kit
FAP-7822 (option)............................ 1-13
2. WIRING.................................................. 2-1
2.1 General Wiring ................................... 2-1
2.2 Processor Unit.................................... 2-2
2.2.1 Connections inside the processor
unit ........................................... 2-2
2.2.2 How to fasten cables to the cable .
clamps...................................... 2-3
2.2.3 How to put wires into the connector
blocks....................................... 2-4
2.2.4 How to terminate of NMEA2000
connection................................ 2-5
2.2.5 Power and motor cables .......... 2-5
2.2.6 Teleflex linear sensor............... 2-7
2.2.7 CAN bus power........................ 2-8
2.2.8 Connection to TB4 ................... 2-8
2.3 Control Unit ........................................ 2-8
2.4 Remote Controllers (option) ............... 2-9
2.4.1 Example remote controller
connections............................ 2-10
2.4.2 Prohibited remote controller
connections............................ 2-11
2.5 Input/Output Sentences ................... 2-12
3. INITIAL SETTINGS ............................... 3-1
3.1 About Initial Settings, Menu Operation3-1
3.2 How to Select Language and Units,
Open the Installation Menu ................ 3-2
3.3 Display Setup ..................................... 3-4
3.4 Ship’s Characteristics Menu............... 3-5
3.5 Dockside Setup Menu ........................ 3-6
Dockside setup for RRU..................... 3-6
Dockside setup for Fantum
Feedback
TM
..................................... 3-15
3.6 CAN bus Port Setup ......................... 3-17
3.7 NMEA0183 Port Setup ..................... 3-18
3.8 Sensor Setup.................................... 3-20
3.9 Universal Port Setup ........................ 3-21
3.10 Sea Trial ........................................... 3-23
3.11 Data Calibration................................ 3-25
3.12 PARAMETER SETUP Menu ........... 3-26
3.13 AUTO OPTION Menu....................... 3-30
3.14 NAV OPTION Menu ......................... 3-31
3.15 FISH HUNTER OPTION Menu or
WIND OPTION Menu ....................... 3-34
3.15.1FISH HUNTER OPTION
menu ...................................... 3-34
3.15.2WIND OPTION menu............. 3-35
3.16 SYSTEM SETUP Menu.................... 3-36
3.17 RC (Remote Controller) SETUP
Menu ................................................ 3-37
3.18 All Clear............................................ 3-37
JIS CABLE GUIDE ................................. AP-1
PACKING LISTS........................................A-1
OUTLINE DRAWINGS...............................D-1
INTERCONNECTION DIAGRAM............... S-1
MOUNTING TEMPLATES
www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.