Furuno GP-1870F, Руководство оператора

Страница: 26 / 209

1. OPERATIONAL OVERVIEW
1-10
1.7 Navigation Data Boxes
The navigation data boxes, displayed at the bottom of the screen, show various navi-
gation data fed from the sensors connected to the display unit. Two or four boxes can
be displayed and you can freely change the data shown in each box. The data that
you can show depends on your system configuration. The boxes can be shown or hid-
den with the [Nav Data] soft control.
Note: Waypoint name, distance to WPT, bearing to WPT, XTE, TTG and ETA are not
available unless you are navigating to a point or route. Bars (---) are shown in the re-
spective box when the data is not available. (For echo sounder fed water temperature
data the bars indicate the temperature is equal to or less than -15°C(5°F).)
1.7.1 How to select the data to display in a box
1. Open the full RotoKey menu then choose [Select Data]. The background color of
all but one of the boxes is grey.
2. Rotate the RotoKey
TM
to select the data box to change then push the key to show
the [Select Data] (data category) window.
3. Select a data box category, and a window with choices relevant to your selection
appears.
4. Select the data desired.
kn
Box not greyed out is
currently selected box.
kn
When you choose [TRIP] at
[Speed/Bearing], [Reset] appears
in the [Select Data] window. To
reset the trip, select this [Reset].
Navigation
Speed/
Bearing
Depth
Environment Wind
DST
BRG