Furuno GP-1670, Руководство оператора

Страница: 91 / 142

9. OTHER FUNCTIONS
9-5
9.4 How to Select Input, Output Data
Select the data to receive and output. Before selecting data to output, confirm what
data the external equipment requires. Output necessary data only. Outputting unnec-
essary data can cause receiving problems at the external equipment.
9.4.1 Input data
Open the [INTERFACE] menu and select [SELECT INPUT DEVICE].
Select the item to process then push the RotoKey
TM
. Do one of the following depend-
ing on your selection.
Item Options
[POSITION & SOG/COG] [Internal GPS]: Use the internal GPS navigator.
[Auto]: Select if you have multiple navigators connected
and you want to use them instead of the internal GPS
navigator.
If the external source is a FURUNO make, its name ap-
pears below [Auto]. Select it to have that device feed re-
spective data.
[DEPTH], [WATER TEM-
PERATURE] and [SPEED
THROUGH WATER] [Fish Finder]: Select to have external fish finder feed re-
spective data.
[Auto] Select when multiple external sources are avail-
able and you want to use them instead of the internal fish
finder. In this case, the device with the lowest IP address
has priority.
If the external source is a FURUNO make, its name ap-
pears below [Auto]. Select it to have that device feed re-
spective data.
Other items Select [Auto] in case of multiple sources, or the FURUNO
device name that appears below [Auto] if a FURUNO de-
vice is connected.