Furuno GP-1670, Руководство оператора

Страница: 90 / 142

9. OTHER FUNCTIONS
9-4
9.3 Stopwatch, Timer
A stopwatch or timer is available on a navigation data display. (The stopwatch and tim-
er cannot be used simultaneously.) The stopwatch measures the elapsed time and the
timer measures the remaining time from a set time. To enable the stopwatch or timer,
do the following.
1. Display a home screen that has a quarter screen or a half screen with navigation
data. If you do not currently have one, make one referring to section 1.8.
2. Long press the HOME/CTRL key to select a data display where
to show the timer or stopwatch display. The selected indication
is circumscribed with a red rectangle.
3. Open the RotoKey menu then choose [Select Data].
4. Rotate the RotoKey
TM
to select the indication to change then
push the RotoKey
TM
. The [Select Data] window, shown in the
right figure, shows the data categories available.
5. Select [Stopwatch] followed by [TIMER] or [WATCH].
Timer
Select the screen that has the timer then set the timer by operating the up or down
arrow on the
CursorPad . Press the ENT key to start or stop the timer. When the ter-
minal count is reached the aural alarm sounds. (The alarm sounds even if the audible
alarm is turned off in the [ALARMS] menu.) To reset the timer, open the RotoKey
menu then select [Reset].
Stopwatch
To start or stop the stopwatch, select the screen that has the stopwatch then press the
ENT key. To reset the stopwatch to zero, open the RotoKey menu then select [Reset].