Furuno GP-1640F, Руководство оператора, Страница: 91 / 108

13-1
13. MAINTENANCE &
TROUBLESHOOTING
13.1 Maintenance
Regular maintenance is essential for good
performance. A maintenance program should
be established and should at least include the
items listed in Table 13-1.
Note:
The equipment may restart when certain
metallic parts on the rear of the display
unit are touched. This is caused by
static electricity. No operational error
occurs.
Do not open the equipment.
Hazardous voltage which can
cause electrical shock, burn or
serious injury exists inside the
equipment. Only qualified
personnel should work inside
the equipment.
WARNING
Table 13-1 Recommended maintenance program
Item Check point Remedy
Antenna Check for loosened and corroded bolts.
Tighten loosened bolts. Replace
heavily corroded bolts.
Check connection point for
watertightness.
Check connector for tightness and
corrosion.
Antenna cable
Check cables for damage.
Replace damaged parts.
Display unit
connectors Check for tight connection and
corrosion. Tighten loosened connectors.
Ground terminal
Check for tight connection and
corrosion. Clean or replace as necessary.
Display unit
Dust and foreign material on the display
unit and screen.
Dust or dirt on the display unit can be
removed with a soft cloth. If desired, a
water-moistened cloth may be used.
Use special care when cleaning the
LCD since it scratches easily. Do not
use chemical cleaners to clean the
display unit - they can remove paint
and markings.
Transducer
Check the transducer face yearly for
marine life, which can reduce sensitivity. Gently scrape off any marine life from
the transducer with a piece of wood.