Furuno GP-1640F, Руководство оператора, Страница: 72 / 108

11-4
POSITION DISPLAY
Displays position in latitude and longitude
(default setting) or Loran C or Decca TDs.
SET GO TO METHOD
Selects the method for entering the quick point:
1 POINT, 35 POINT (2-35 points), or
WPT/PORT SER. For further details see pages
8-1 and 8-2.
OPERATION MODE
Selects the operation mode between
PLEASURE, FISHING 1 and FISHING 2.
Mode Remarks
PREASURE Mark cannot be entered.
FISHING 1
Mark can be entered. MOB mark is entered
with the normal waypoint mark by pressing
the [MOB/SAVE] key down.
FISHING 2
Mark can be entered. When pressing the
[MOB/SAVE] key, the waypoint edit window
appears. If the waypoint edition is not
necessary, press the [MOB/SAVE] key again
to enter the MOB mark.
LANGUAGE (Not available for C-map)
You can select the language shown on display,
English or French.
DISPLAY SETUP 2 menu description
The display setup2 menu contains video
sounder-related items which the user may
adjust as desired. Set up these items as
follows:
1. Press the [MENU] key.
2. Press the DISPLAY OPTIONS soft key.
3. Press the NEXT PAGE.
GPS 3D
DISPLAY
SETUP2
RETURN
EDIT
SPEED SOURCE
TEMP SOURCE
TEMP GRAPH
ZOOM MARKER
SPEED ADJ.
TEMP ADJ.
DEPTH ADJ.
GPS
OWN XDCR
OFF
OFF
+0.0%
+0.0 F
+0.0 ft
▼
PREV.
PAGE
Page 2
SPD
0.0
kt
TEMP
--.-
F
DEPTH
----.-
ft
Display setup2 menu
SPEED SOURCE
Selects the speed source input; OWN
PDDWHL (speed sensor) or GPS (external).
TEMP SOURCE
Selects source of water temperature input;
NMEA (external) or OWN XDCR (water
temperature sensor, default setting).
TEMP GRAPH
Displays water temperature in line graph form.
Requires water temperature data.
ZOOM MARKER
The zoom marker appears in the normal,
bottom marker and bottom zoom displays and
marks the area which is expanded in the
bottom marker and bottom zoom pictures. You
can turn on/off the marker as desired.
SPEED ADJ.
In the speed sensor-generated speed
indication is wrong, you can correct it here.
(NMEA format speed data cannot be adjusted.)
For example, if the speed indication is 10%
lower than actual speed, press
▲ to display
+10.
TEMP ADJ.
If the water temperature sensor-generated
water temperature indication is wrong, you can
correct it here (NMEA format water
temperature data cannot be adjusted.) For
example, if the water temperature indication is
2
û higher than actual water temperature, press
▼ to display –02.0.
DEPTH ADJ.
The depth indication can be offset to increase
accuracy. The procedure is similar to that for
TEMP ADJ and speed ADJ.