manualshive.com logo in svg

Furuno FM-4721, Руководство оператора

Поделиться
Скачать
Furuno FM-4721 Скачать руководство пользователя страница 74

8-1

8.

INSTALLATION

8.1

Transceiver Unit

The transceiver unit can be mounted on a desktop or overhead, or flush mounted in a 
panel. Choose a mounting location considering the points mentioned below.

•  Follow the compass safety distance shown in the safety Instructions to avoid any 

interference to the compass from the speaker magnet in the transceiver.

•  Select a location which provides easy access to the front panel controls.

•  The location has space for installation of a microphone hanger.

•  Choose a mounting location that is at least 1 m away from the radio's antenna.

• 

CAUTION: The heatsink can get hot enough to cause a burn injury. Select a 
location where it cannot be easily touched

.

Note: 

To insure the radio does not affect the compass and the radio's performance is 

not affected by the antenna location, temporarily locate the radio in the desired loca-
tion and:

a) Examine the compass to see if the radio interferes with the compass.

b) Connect the antenna and transmit. Check to ensure the radio is operating correctly 

by requesting a radio check.

8.1.1

Desktop or overhead mount

The supplied mounting bracket permits desktop or overhead mounting.

Use a 5 mm bit to drill the holes to a surface that is more than 10 mm thick and can 
support the unit’s weight (1.5 kg). Fasten the bracket with the supplied screws, spring 
washers, flat washers, and nuts.

Desktop mounting

Overhead mounting

www.busse-yachtshop.de  |  [email protected]

Содержание FM-4721


































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды