Furuno FM-4721 Скачать руководство пользователя страница 17

Страница: 17 / 97

2. OPERATION

2-6

2.4

Transmit Timeout Timer (TOT)

When the

PTT

switch on the microphone is pressed continuously, transmit time is lim-

ited to five minutes. This limits unintentional transmissions due to a stuck

PTT

switch.

About 10 seconds before automatic transmitter shutdown, a warning beep sounds
from the speaker(s). The transceiver automatically goes to the RX mode, even if the

PTT

switch is continually held down. To transmit again, the

PTT

switch must first be

released and then pressed again.

CAUTION

: The heatsink can get hot enough to cause fire or burn injury when the TX

to RX ration goes lower than 1:9.

2.5

Simplex/Duplex Channel Use

Refer to the VHF Marine Channel Chart in the Appendix for instructions on use of sim-
plex and duplex channels.

Note:

All channels are factory-programmed in accordance with FCC (USA), Industry

Canada (Canada), and International regulations. Mode of operation cannot be altered
from simplex to duplex or vice-versa.

2.6

International, Canada, and USA Mode

To change the channel Group call from International to Canada or USA:

Press and hold down the

CALL/MENU

key until the [Setup Menu] appears.

Rotate the

knob to select [CH Function Setup] then

press the [SELECT] soft key.

Rotate the

knob to select [CH Group] then press

the [SELECT] soft key.

Rotate the

knob to select a channel Group [USA],

[INTL], or [CAN (CANADA)] then press the [ENT] soft key to store the selected
setting.

Note:

When in INTL channel group, inland waterways channel group can be se-

lected from the ATIS menu by switching ATIS to ON. See section 6.2.

Press the [QUIT] soft key several times to return to radio operation.

2.7

Backlight Adjustment

Adjust the display illumination for viewing in sunlight or darkness.

Press the

FUNC

key followed by the

4/DIM

key to show the [Dimmer] menu.

Rotate the

knob to select the desired level. When

[OFF] is selected, the backlight is turned off.

Press the [ENT] soft key to store the selected level,
and return to radio operation.

www.busse-yachtshop.de | [email protected]

Содержание FM-4721


































































































Результаты поиска

Содержание FM-4721

Отзывы:

Бренды по названию

Популярные бренды

Furuno FM-4721, Руководство оператора

Результаты поиска

Содержание FM-4721

Отзывы:

Бренды по названию

Популярные бренды