Furuno FELCOM251, Руководство по установке

Страница: 1 / 122

www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
INMARSAT FLEET BROADBAND
Model
FELCOM251/FELCOM501
SAFETY SUMMARY ................................i
SYSTEM CONFIGURATION ..................iv
EQUIPMENT LISTS................................vi
1. SYSTEM UNITS...............................1-1
1.1 Introduction .........................................1-1
1.2 Communication Unit............................1-1
1.3 FELCOM501 Antenna Unit .................1-3
1.4 FELCOM251 Antenna Unit .................1-3
1.5 IP Handset & Cradle ...........................1-4
2. INSTALLING THE SYSTEM............2-1
2.1 Unpacking ...........................................2-1
2.2 Placing the Antenna Unit ....................2-1
2.3 Installing the Antenna Unit ................2-11
2.4 Placing the Communication Unit.......2-24
2.5 Installing the Communication Unit ....2-26
2.6 Installing the 19” Rack Communication
Unit....................................................2-29
2.7 Installing the Telport Extender
(Option) .............................................2-30
2.8 Installing the USB-RS232C Converter
(Option) .............................................2-30
2.9 Telephone (Option) ...........................2-31
2.10 Facsimile FAX-2840 (Option)............2-31
2.11 Incoming bell (Option).......................2-33
3. CONNECTING POWER ..................3-1
3.1 Power Source .....................................3-1
3.2 Power Cable Selection........................3-2
3.3 Connecting Power...............................3-5
4. GROUNDING AND RF
PROTECTION..................................4-1
4.1 Why is Grounding Required?..............4-1
4.2 About Marine DC Systems..................4-2
4.3 About Marine Grounding.....................4-4
4.4 Grounding Recommendations ............4-5
4.5 Alternative Grounding for Steel Hulls..4-7
4.6 Alternative Grounding for Aluminium
Hulls ....................................................4-9
4.7 Alternative Grounding for Fibreglass
Hulls ..................................................4-10
4.8 Alternative Grounding for Timber
Hulls ..................................................4-12
4.9 Separate Ground Cable ....................4-14
4.10 RF Interference .................................4-16
4.11 Electrostatic Discharge .....................4-16
5. HARDWARE INTERFACES............5-1
5.1 The Connector Panel ..........................5-1
5.2 Antenna Unit Interface on
Communication Unit............................5-2
5.3 DC Power Input...................................5-3
5.4 Ground Stud........................................5-4
5.5 Analog Phone/Fax Interface ...............5-4
5.6 USB Interface......................................5-5
5.7 LAN Interface ......................................5-5
5.8 Discrete I/O Interface ..........................5-8
5.9 Peripheral Equipment .........................5-9
6. STARTING UP THE SYSTEM.........6-1
6.1 Using the SIM Card.............................6-1
6.2 Powering the System ..........................6-3
6.3 Entering the SIM PIN for the
Communication Unit............................6-4
6.4 Operating the system..........................6-5
7. TROUBLESHOOTING ....................7-1
7.1 Status Signalling .................................7-1
7.2 Logging of Events ...............................7-3
APPENDIX 1 GLOSSARY................AP-1
PACKING LISTS ................................. A-1
OUTLINE DRAWINGS ........................ D-1
INTERCONNECTION DIAGRAM........ S-1