manualshive.com logo in svg

Furuno FELCOM 15, Руководство оператора, Страница: 103 / 210

Поделиться
Скачать
Furuno FELCOM 15 Скачать руководство пользователя страница 103

4. INMARSAT C COMMUNICATIONS 

 

4-7

Note 3:

  Messages sent to the message queue may contain up to 32 KB of 

data. If data is larger than 32 KB, the message “Cannot enter this 
message to sending Queue. Press any key.” appears.   

 

30. Press the [Esc] key twice to return to the standby display. 
 
The message(s) will be transmitted according to the Send Delay setting. 
“Current State: SENDING” appears at the bottom of the screen while the 
message is being transmitted. If the message was transmitted successfully, 
“Successful Sending message” appears and the TX message is printed (if 
“Confirmation is ON). You can view details about the message in the Display Log 
(see paragraph 4.3). 

Sent Message
DELIVERY CONFIRMATION OFF

Message File

: 00FOX.TXT

Message Size

:    277 characters

LES

: Stratos M.N.

Date

: 02-03-10

Priority

: Normal

Time

: 06:06 (UTC)

Destination

: TELEX (Prefixed)  00111222222222222222 (IA5)

                        00111333333333333333
                        00111444444444444444

 

Display log printout example (“Confirmation” OFF) 

When Confirmation is ON and you receive a delivery status message, the 
message “Delivery Status received for (file name).” appears and the delivery 
status message is printed. 

Sent Message
DELIVERY CONFIRMED

Message File

: 00FOX.TXT

Message Size

:    277 characters

LES

: Stratos M.N.

Date

: 02-03-10

Priority

: Normal

Time

: 06:06 (UTC)

Destination

: TELEX (Prefixed)  00111222222222222222 (IA5)

 

Display log printout example (“Confirmation” ON, message delivered) 

Sent Message but not delivered
DELIVERY FAILURE : xxx    

 

 

Message File

: 00FOX.TXT

Message Size

:    277 characters

LES

: Stratos M.N.

Date

: 02-03-10

Priority

: Normal

Time

: 06:06 (UTC)

Destination

: TELEX (Prefixed)  00111222222222222222 (IA5)

 

Display log printout example (“Confirmation” ON, message not delivered) 

Sent Message but not delivered
DELIVERY STATUS NOT RECEIVED (

In case of timeout)

 

 

Message File

: 00FOX.TXT

Message Size

:    277 characters

LES

: 

Stratos M.N.

Date

: 02-03-10

Priority

: Normal

Time

: 06:06 (UTC)

Destination

: TELEX (Prefixed)  00111222222222222222 (IA5)

   

Содержание FELCOM 15



















































































































































































































Отзывы:

Нет отзывов