Furuno FEA-2107, Руководство по установке

Страница: 46 / 168

3. ADJUSTMENTS
3-4
Activate changes now: The changed settings are activated immediately. When canceling
the activation, click the “X” at the top of the screen.
Restart needed to activate: The changed settings are activated when the power is turned
off and on again.
Sensor Channel Usage
This shows how the serial channels of A
adapters are configured and which analog
sensors are connected to the system
through the B adapter. Notation x (nnnn)
(right is an example of x (GYRO2)) is used
to show that some sensor data is collected
from the data flow of the main sensor.
What happens after pressing Activate changes now
After pressing Activate changes now, you may get one of the following alarms.
"700 (V.05.xx: 4000) No Sensor parameters" : The Sensor Parameters are corrupted. Use
backup of Parameters.
"600 (V.05.xx: 3000) Param change disabled" : The ECDIS cannot accept change of
parameters if Kalman Filter is ON or ECDIS is currently used for steering. Use manual or
autopilot steering and turn Kalman Filter OFF when you change parameters.
"459 (V.05.xx: 2459) Steering parameter error" : There are incorrect values in the Track
pilot installation parameters. Check values of the Track pilot parameters.