Furuno FEA-2107, Руководство по установке

Страница: 144 / 168

4. INPUT/OUTPUT SIGNALS
4-2
ARPA Radar
•
Two ARPA radars can be connected using one of the following communication protocols.
•
IEC 61162-1 Ed.1 or Ed.2 standard messages $XXOSD and $XXTTM for input and
messages $ECGLL, $ECDTM, $ECDPT and $ECMWV for output. Targets numbered
from 1 to 100 are accepted in TTM message. The datum of GLL message is fixed
and it is WGS84 (for serial interface only).
•
FURUNO interface with IEC 61162-1 Ed.1 standard messages $XXOSD and $XXTTM
for input and messages $IIGLL, $IIOSD for proprietary messages for user
charts, routes, curved ebl, etc (for serial interface and LAN).
AIS transponder equipment
•
One serial input interface (IEC 61993-2 Ed.1 message !XXVDM, message types 1,2,3
and 5, min 1 message per 10 seconds)
•
Notes:
•
Max. 1500 simultaneous AIS targets can stored for display purposes.
•
Max. 200 simultaneous AIS targets out of 1500 stored can be displayed.
Trackpilot
•
Serial data interface based on NMEA V1.5 messages for EMRI SEM-200 or FURUNO
FAP-2000 Trackpilot (IEC 62065 category B and C for TCS)
•
Or serial data interface based on NMEA messages for YOKOGAWA autopilot (NOTE: IEC
62065 type approval of category B for TCS)
•
Or serial data interface based on NMEA messages for TOKYO KEIKI autopilot
(NOTE:IEC 62065 type approval category C for TCS)