Furuno FCV-1900, Руководство по установке

Страница: 43 / 64

3. INITIAL SETTINGS
35
9. Rotate the ENTER knob to select [Test], select [Diagnostic Test], then push the
knob.
The diagnostic test window appears.
10. At the first line of the [Display unit] section of the test result, confirm that the up-
grading is complete. “Product Grade” shows FCV-1900B or FCV-1900G depend-
ing on the upgrade.
11. Press the MENU/ESC key three times to close the test window.
12. Press the MENU/ESC key several times to close the menu.
13. Turn the processor unit off and then remove the USB flash memory.
Press the camera icon key 3 times to capture. (1/99) Press the [MENU/ESC] key 3 times to exit.
Display Unit
Product Grade : FCV-1900
MAC Address : 00-40-9D-7D-9D-32
IP Address : 172.31.92.7
CPU Status : 29
Application Ver : 0252434-xx.xx
System Ver : 0252437-xx.xx
Kernel Ver : 0252436-xx.xx
Fan Speed : 5160rpm
U-Boot Ver : 0252435-xx.xx
PIC Boot Ver : 1950143-xx.xx
PIC Main Ver : 1950144-xx.xx
Calib.: OK
Signal Unit
Fish Finder Sensors
ROM : OK
RAM : OK
MAC Address : 00-D0-1D-0C-A5-31
IP Address : 172.31.92.6
Power Voltage(12V) : 12.1V
Power Voltage(5V) : 5.0V
HF BVolt : 120.9V
LF BVolt : 113.2V
PWR Board Ver : 0
CTRL Board Ver : 0
TRX Board Ver : 0
Application Ver : 0252425-xx.xx
FPGA Ver : 0252426-xx.xx
Boot Ver : 0252424-xx.xx
Start Ver : 0252423-xx.xx
Fan Speed : 8640.0rpm
Port1(NMEA1) : --
Port2(NMEA2) : --
Port3(Tankenmaru) : --
Port4(SC) : --
Port5(CIF) : --
Telesounder : --
Temp : 10.4ºC
TX Status : HF(0.0%)LF(0.0%)
ROM : OK
RAM : OK
Application Ver : xxxxxxxxxx
Boot Ver : xxxxxxxxxx
Temp : 10.4ºC
xx.xx: Program version
Product
grade