Furuno FCV-1900, Руководство по установке

Страница: 29 / 64

3. INITIAL SETTINGS
21
3.2 Monitor Setting
Depending on your monitor, the resolution setting may need to be changed. The res-
olutions available are XGA (1024
×
768), SXGA (1280
×
1024), SXGA (1024
×
1280, por-
trait type) and Full HD (1920
×
1080). SXGA monitors (1280
×
1024) are set to the
correct resolution and do not require this initial setting.
Note 1: When setting the monitor resolution, be sure the control unit is connected. Al-
so, confirm that no USB memory is connected.
Note 2: For the Full HD resolution (1920
×
1080) setting, the monitor must 1080p (60
fps) compatible.
Service menu
1. Press the MENU/ESC key to open the [Setting] menu.
2. Press the MENU/ESC key (approximately ten seconds) to show the [Service]
menu item in the menu.
3. Rotate the ENTER knob to select [Service], then push the knob.
4. Rotate the ENTER knob to select [Display Resolution], then push the knob.
Setting
Sounder
Display
Measurement
Alarm
Data
System
Service
Interference
Color Erase
White Edge
Clutter
TVG
STC
Pic. Advance
Smoothing
Bottom Zone
Off
0%
Off
x4
Off
Setting
XGA (1024 x 768)
SXGA (1280 ｘ 1024)
SXGA (1024 x 1280)
FHD (1920 x 1080)
Bottom Search
Deference Gain
Deference Bottom Level
Log
Display Resolution
TX Triggering
In Trigger
Trigger Input
Out Trigger
Trigger Output
External Fish Finder Trigger
Restore Default Setting
Demonstrate
XDCR Setting
TD-ID Information
White Marker
ACCU-FISH Calib
Fish Detection Mark
TrueEchoCHIRP
Bottom Noise Rejector
Fish Graph Reliability Threshold
Off
SXGA
（
1280x1024
）
Off
↑
HF
Positive
Off
Off
Off
On
100
Sounder
Display
Measurement
Alarm
Data
System
Service