Furuno FCV-1900, Руководство по установке

Страница: 12 / 64

1. MOUNTING
4
1.3 Transducer
The performance of the fish finder depends upon the transducer position. A place least
affected by air bubbles should be selected since turbulence blocks the sounding path.
Further, select a place least influenced by engine noise. It is known that air bubbles
are fewest at the place where the bow first falls and the next wave raises, at usual
cruising speed. In small, slow-speed boats, the position between 1/2 and 2/3 of the
ship’s length from the bow is usually a good place.
The face of the transducer must be facing the sea bottom in normal cruising trim of the
boat.
The cable length of the transducers is as follows:
Note: Do not cut the transducer cable when installing an Airmar transducer.
1.4 External Monitor
You can connect a MU-190/V/HD, MU-150HD, MU-231 or a commercial monitor as
an external monitor. The external monitor must have the following specifications.
• Video signal: HDMI or DVI-D, Single link, DVI-D requires optional cable assembly.
• Resolution: SXGA (1280 x 1024), SXGA (1024 x 1280), XGA (1024 x 768) or Full
HD (1920 x 1080)
Note: Brilliance control is available for MU-190/150/231 series with the optional USB
cable (RNS-08-132) and USB cable (CP013638-07-A (550MM)). Brilliance control is
not available for other monitors.
Type Cable length (m)
50B-6, 50/200-1T, 200B-5S, 200B-8 10
CM265LH, CM265LM, CM275LH-W 12
28F-8, 28BL-6HR/18/12HR, 38BL-9HR/15HR, 50B-6B/9B,
50BL-12HR/24HR, 68F-8H/30H, 82B-35R, 88B-8/10, 88F-
126H, 100B-10R, 150B-12H, 200B-8B/12H, CM599LH/LM,
PM111LH/LM
15