manualshive.com logo in svg

Furuno FAR-2218, Руководство оператора, Страница: 194 / 294

Поделиться
Скачать
Furuno FAR-2218 Скачать руководство пользователя страница 194

4.  AIS OPERATION

4-18

4.14

AIS Collision Alarm (CPA, TCPA)

This radar calculates CPA and TCPA by using own ship and relative target positions. 
An AIS dangerous target is one whose CPA and TCPA are within the range of the CPA 
and TCPA limits set in the TT/AIS box. The AIS symbol of an AIS dangerous target is 
red and flashing, and is announced with the Alert "AIS DANGER OF COLLISION". Af-
ter the alert is acknowledged the target symbol is displayed in red color.

4.14.1

How to set the CPA and TCPA ranges

CPA and TCPA ranges can be adjusted from the ap-
propriate indication in the [TT] box.

1. Left-click the [CPA/TCPA] indication to activate 

the feature.

2. Place the cursor on the indication you wish to 

adjust.

3. Left-click, or spin the scrollwheel, to adjust the settings as required. The settings 

options are outlined in the table below.

Indication

Method

Settings options

CPA

Left-click

0.5, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0 (NM)

Scrollwheel

0.1 to 20; 0 to 10 in 0.1 NM increments, 1 NM increments thereafter

TCPA

Left-click

1, 2, 3, 4, 5, 6, 12, 15 (minutes)

Scrollwheel

1 to 60 minutes in 1-minute increments

Thicker than
activated target

When a sleeping or an activated target violates the CPA/TCPA 
alarm setting its symbol changes to the dangerous target 
symbol (red and flashing) and the message “AIS DANGER OF 
COLLISON” appears. Press the 

ALARM ACK

 key (or click the 

[ALERT] box with the left button) to acknowledge the 
CPA/TCPA alarm. The audible alarm is silenced and the 
symbol stops flashing.
Take appropriate action to avoid collision.

Dangerous target

CPA setting

TCPA setting

Left-click here to activate 
CPA/TCPA settings.

Содержание FAR-2218







































































































































































































































































































Отзывы:

Нет отзывов