Furuno DRS4DL+, Руководство по установке

Страница: 12 / 32

1. INSTALLATION
6
Note 1: The antenna unit has no power switch. Connect the antenna unit to a dis-
tribution switchboard with a switch for power control.
Note 2: The antenna unit cannot accept input voltage of more than 24 VDC.
Installation with the radome mount
The optional radome mount lets you install the radar sensor to a mast on a sailboat.
Name, Type : Radome Mount, OP03-209
Code No. : 001-078-350
How to assemble the bracket
1. Fasten the fixing plates to brackets (1) and (2) with four M8
u
20 hex bolts.
2. Fit brackets (1) and (2) loosely with support plates (1) and (2) using four M4
u
12
hex bolts, so that the gap between the brackets can be adjusted.
3. Place the mounting plate on the bracket and fix it loosely with four M8
u
20 hex
bolts.
How to fasten the bracket to the mast
1. Drill eight holes of 6.5 mm diameter in the mast.
Fasten the bracket to the mast with eight stainless
steel rivets (local supply) whose diameter is 6.4 mm.
2. Tighten the bolts on the bracket.
3. Fasten the antenna unit to the bracket with bolts
(M10
u
25).
Name Type Code No. Qty
Mounting plate 03-018-9001-0 100-206-740-10 1
Support plate (1) 03-018-9005-0 100-206-780-10 1
Support plate (2) 03-018-9006-0 100-206-790-10 1
Bracket (1) 03-028-9101-2 100-206-812-10 1
Bracket (2) 03-028-9102-2 100-206-822-10 1
Fixing plate 03-028-9103-2 100-206-832-10 2
Hex bolt w/washer M8
u
20 SUS304 000-162-955-10 10
Hex bolt w/washer M4
u
12 SUS304 000-162-956-10 4
Fixing plate
Bracket (2)
Bracket (1)
Bracket (2)
Bracket (1)
M8×20
M4×12
M4×12
Mounting
plate
Step (1) Step (2) Step (3)
M8×20
M8×20
M10×25
Rivet