Furuno DRS4DL, Инструкция по установке

Страница: 12 / 28

7
2. WIRING
2.1 Connections
2.1.1 Power Requirement
The DRS4DL requires either 12 VDC or 24 VDC power. The 10/15/20 m cables are
for 12 or 24 VDC, and the 30 m cable is for 24 VDC only. Connect the red cable to the
positive terminal of ship’s battery; the blue cable to the negative terminal. The black
cable is a shielding cable for grounding.
2.1.2 LAN Cable Connection
Connect LAN cable to the multi function display device.
2.2 Check Points After Installation
Before using the product, carry out the following:
• Mechanical checks
• Turning the power on and initial setup
Mechanical checks
Check below points before switching on the DRS4DL.
• All washers are in place and bolts are fully tightened.
• All connections are secure.
• All connecting cables and wires are secured.
• LAN cable is connected to the multi function display device.