Furuno CH-37 Скачать руководство пользователя страница 4

Страница: 4 / 90

Name: Warning Label (1)
Type: 86-003-1011-0
Code No.: 100-236-230

CAUTION

WORKING WITH THE SONAR OIL

Precautions

•

Keep oil away from eyes. Wear protective
gloves when working with the oil. The oil
can cause inflammation of the eyes.

•

Do not touch the oil. Wear protective
gloves when working with the oil. The oil
can cause inflammation of the skin.

•

Do not ingest the oil. Diarrhea or vomiting
can result.

•

Keep the oil out of reach of children.

Emergency

•

If the oil enters eyes, flush with clean water
about 15 minutes. Consult a physician.

•

If the oil contacts skin, wash with soap and
water.

•

If the oil is ingested, see a physician
immediately.

Disposal of oil and its container
Dispose of oil and its container in accord-
ance with local regulations. For further
details, contact place of purchase.

Storage
Seal container to keep out foreign
material. Store in dark place.

Содержание CH-37



























































































Результаты поиска

Содержание CH-37

Отзывы:

Похожие инструкции для CH-37

Бренды по названию

Популярные бренды

Furuno CH-37, Руководство оператора

Результаты поиска

Содержание CH-37

Отзывы:

Похожие инструкции для CH-37

Бренды по названию

Популярные бренды