Furuno 1835, Руководство по установке

Страница: 9 / 48

1-3
Normal position of the antenna unit on the sailboat and powerboat
• To reduce the electrical interference, do not run the antenna cable near other electrical equip-
ment. Also do not run the cable in parallel to power cables.
• Make sure that you follow the compass safe distance shown on page i to prevent the interfer-
ence to a magnetic compass.
• Make sure all areas where the cabling passes through the vessel supertructure, as well as the
cable erntrance in the radome, are waterproofed wtih marine sealant. Failure to do so can lead
to water seepage and may cause equipment malfunction or damage.
How to install the antenna unit
1. Open the packing box of the antenna unit with great caution.
2. Loosen the four bolts at the base of the radome to remove the radome cover.
Antenna unit
The location where you install the antenna unit must be parallel to the waterline. Make five
holes in the installation location. See the outline drawing at the end of this manual for dimen-
sions. A target echo returned from the bow direction must be shown on the zero degree posi-
tion on the screen. When you make holes, make sure the holes are parallel to the fore-and-aft
line.
3. Prepare a platform of 5 to 10 millimeters in thickness for the antenna unit.
Antenna unit
Antenna unit
Antenna unit
Antenna unit