Furuno 1835, Руководство по установке

Страница: 12 / 48

1-6
8. Fasten the signal cable, referring to the figures below, as appropriate for your antenna model.
For RTR-057 installation, connect the shield cable to the ground with one of the screws on the
clamping plate.
For RTR-057A installation connect the shield cable to the ground with the screw next to the IF
Amp board.
Antenna unit signal cables
Shield cable fastened
with clamping plate screw
Shield cable fastened to
screw between IF board
and motor.
9-pin connector:
to J801 on MD-9208
4-pin connector:
to J802 on MD-9208
13-pin connector:
to J611 on IF-9214*
1
or 03P9522*
2
*1: For Antenna unit RSB-0071-057, XN10A-RSB-0070-064, XN10A-RSB-0073-064,
XN12A-RSB-0070-059 and XN12A-RSB-0073-059
*2: For Antenna unit RSB-0071-057A, XN10A-RSB-0070-064A, XN10A-RSB-0073-064A,
XN12A-RSB-0070-059A and XN12A-RSB-0073-059A
RTR-057 - to clamping plate screw
RTR 057A - to IF Amp adjacent screw.