Furukawa electric S178, Руководство пользователя

Страница: 77 / 162

Operating Instructions
6-5
enough screening power might not be applied for the loose tube fiber.
6.2.3. Fusion Splicing
1. Ensure that the “READY” screen is displayed on the monitor.
2. Press to initiate the fusion splicing cycle.
3. The S178 fusion splicer performs the following functions automatically. To pause the S178
fusion splicer during any of these functions, press . The message PAUSE will be
displayed on the monitor. To restart the operation, press again.
z The right and left fiber ends appear on the LCD monitor. (High speed fiber feeding)
z
A cleaning arc is discharged to clean the fiber ends.
z The fibers are set with a gap of about 20 µm between
the ends. (Middle speed fiber feeding)
z X screens are zoomed up.
z The fibers are inspected for axis offset and cleave
condition.
z The cores of the fibers are aligned on the X and Y view
screens.
z
The electrodes discharge.
z The splice is inspected.