![Furrion FMCM15-BL-A Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/furrion/fmcm15-bl-a/fmcm15-bl-a_user-manual_2349420017.webp)
16
1. To remove the exhaust ventilation filters, slide the filter to
the rear. Then pull filter downward and push to the other
side. The filter will drop out. Repeat for the 2nd filter.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry or wash in a
dishwasher.
Do not use ammonia. The aluminum on
the filter will corrode and darken.
3. To reinstall the exhaust ventilation filter, slide it into the
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.
Light
CAUTION
Light cover may become very hot. Do not touch glass when
light is on.
1. Unplug the microwave oven or turn off power at the main
circuit breaker.
2. Remove the bulb cover mounting screws at both light
positions under the microwave.
3. Replace bulb with 120V, 20W x 2, type: T22.
4. Re-install bulb cover and mounting screw.
5. Plug the microwave back into the power supply or turn the
power back on at the main circuit breaker.
Charcoal Filter
Charcoal Filter installed in your microwave oven, is used
for nonvented, recirculated installation. The filter should be
changed every 6 to 12 months depending on use.
1. Disconnect power to the microwave oven at the circuit
breaker panel or by unplugging.
2. Remove the vent grill mounting screws.
3. Pull the vent grill away from the unit.
4. Remove the charcoal filter by pushing it inwards, then turn
and pull it away from the unit.
Oven Light
Remove the vent grill per instructions 1-4 above and charcoal
filter, if used.
1. Open light cover located behind filter mounting by care
fully pulling up on the front edge.
2. Remove old light bulb and replace the bulb with 120V,
30W x 1, type: T25 x 55mm).
NOTE: DO NOT USE BULB LARGER THAN 30 WATTS.
3. Replace the microwave oven light cover by carefully
pushing into place. Replace the charcoal filter. Push the
vent grill back into place (engaging both the bottom and
top tabs) and replace the vent grill mouting screws.