7
Installation
25 ¼”
21”
6 ½”
25 ¼”
6 ½”
Fig. A
Fig. B
Fig. D
Fig. C
Wall-mount Installation
1. Select a suitable location that is not susceptible to moisture.
2. Mark and cut an opening in the cabinet according to the dimensions outlined
in the illustration below. (Fig. A)
3. Ensure the cabinet area is free of dust and debris, remove fi replace carefully
from carton and discard the plastic and foam packaging.
4. The trim kit for the unit is attached by magnet, pull to remove. (Fig. B)
5. Install the fi replace into the cut out area and secure with 4 mounting screws
supplied. (Fig. C) For your safety, it is recommended to apply the top 2 screws
fi rst.
6. Re-attach the trim kit to the fi replace.
7. Do not block the ventilation areas. (Fig. D)
