18
Operation
English
Select a preset EQ mode
Press and hold
SEL
EQ
on the front panel to
select the preset music equalizer curves:
CINEMA, ROCK, CLASSIC, FLAT, or EQ OFF.
Turn on / off LOUD mode
Press
SEL
EQ
on the front panel once or more
to select LOUD ON/ LOUD OFF mode.
Adjust the sound equalizer
curves
1. Press
SEL
EQ
on the front panel once or
more to select a sound equalizer curve:
V
OL, BAS (without preset EQ), TRE (without
preset EQ), BAL, LOUD ON/OFF, LOC ON/
OFF, ST ON/OFF, BEEP ON/OFF, or SUB
ON/OFF.
2. Rotate the
VOLUME -/+
knob on the front
panel to select a sound feature.
Select ZONE 1 / 2
Press and hold
ZONE 1/ZONE 2
to turn on or
off the audio source in each of the different
areas where your speakers are connected.
The corresponding zone number will be
displayed on the LCD once selected.
Note:
ZONE 2 supports independent audio
output control.
•
Press
ZONE 2
to activate independent
audio selection mode.
The “
ZONE 2
” icon will flash on the LCD.
●
Select the media source (DISC / USB,
AM / FM, BT, F AUX / R AUX, AV, HDMI),
then adjust the audio effect and preset EQ
independently.
●
After setting ZONE 2 audio output, you can
press
ZONE 2
to switch back to ZONE 1
audio output control mode.
The “
ZONE 2
” icon will stop flashing.
–
If ARC is selected as the media source of
ZONE 2 (ZONE 1), the media source of
ZONE 1(ZONE 2) can be selected as AM /
FM, BT, F AUX, R AUX, AV, or ARC.
–
If AM/FM or BT is selected as the media
source of ZONE 2 (ZONE 1), the media
source of ZONE 1 (ZONE2) can be
selected as DISC / USB, AM / FM, BT, F
AUX, R AUX, AV, HDMI, or ARC.
–
If USB / DISC is selected as the media
source of ZONE 2 (ZONE 1), the media
source of ZONE 1 (ZONE 2) can be
selected as USB / DISC AM / FM, BT, F
AUX, R AUX, or AV.
Reset the unit
In case of incorrect display, button failure, or
distorted sound, you can press
RESET
with a
pointed object such as a clip to reset the unit
to factory default settings.
Radio Operation
Select a radio region
In radio mode, press and hold
AM/FM
to
select your desired radio region: USA1,
USA2, AUSTRALIA, or EUROPE.
Select AM/FM band
In radio mode, press
AM/FM
once or more
to select your desired radio band: FM1, FM2,
FM3, AM1, or AM2.
The selected band will be displayed on the
front panel.
Tune to / search for radio stations
In radio mode:
●
Press and hold
/
on the front
panel (or
/
on the remote
control) to automatically search down/up
for an available station from the current
frequency.
●
Press
/
on the front panel
(or
/
on the remote control)
to manually search up or down for
your desired station from the current
frequency.
