17
Operation
English
Common Operation
Turn the unit on or switch to
standby mode
Press to turn the unit on or switch to
standby mode.
Select a source
1. DVD / USB
- Once a DVD or USB is
inserted into the unit, the unit will
automatically switch to the corresponding
source. If a disc has already been inserted
and the unit is playing from another
source, you can press
DVD / USB
to select
DVD.
2. AM/FM
- Press this button to scroll
through FM1, FM2, FM3, AM1, and AM2.
Press and hold this button repeatedly
to select the radio region: USA1, USA2,
AUSTRALIA, EUROPE.
3. BT
- Press this button to enable Bluetooth
connection.
4. AUX
- This button allows you to scroll
through the AUX inputs fitted to the unit:
–
F AUX
- Connection on front of unit to
connect an external audio source
–
R AUX
- Connection on the rear of
the unit, normally used to connect TV
sound input.
–
AV
- Connection on the rear of the unit
to connect an external audio source
–
HDMI
- Connection is on the front of the
unit
5. HDMI OUT (ARC)
- Connection on the
rear of the unit, used to connect a TV with
Audio Return Channel function. Make
sure the ARC function of the TV is on.
–
For details on setting and operating
your TV, refer to the instruction manual
for the TV.
–
About Audio Return Channel (ARC)
ARC allows audio signals to travel
both ways under HDMI Control. If
you connect a TV that supports HDMI
Control and ARC to the unit with a
single HDMI cable, you can output
video/audio to the TV or input TV audio
to the unit. In case noises are produced
from the speakers connected to the unit
because TV audio signals input to the
unit via ARC are not supported by the
unit, use the TV’s speakers.
Adjust volume
Rotate the
VOLUME -/+
knob clockwise to
increase volume, or rotate counterclockwise
to decrease volume.
Mute
1. Press
MUTE
to mute sound output in any
source mode.
‘MUTE’ will be displayed on the screen.
2. Press
MUTE
again to resume.
Display and set the clock
1. To display the clock on the LCD screen,
press
CLOCK
on the remote control.
In standby mode, the clock time will stay on
the LCD.
2. To adjust or set the clock, press
SEL
EQ
on the
front panel once or more to enter clock setup
mode.
Press
/
to switch between hour
and minute setting
.
Rotate the
VOLUME -/+
knob
to adjust the
hour / minute.
The time on the clock is set automatically after a
few seconds of inactivity.
Set the Alarm
1. Press and hold once or more to enter
alarm clock and alarm source settings.
Repeat the operations in clock setting to
set the alarm.
Two alarm sources are available for
selection: TUNER and USB
2. Press to turn on or off the set alarm.
When the alarm is set, the icon will stay
on the LCD.
